Published since 1923
DOI: 10.33622/0869-7019
Russian Science Citation Index (RSCI) на платформе Web of Science
  • Thermal Stress State of a Roleed Conrete Dam During Construction in Viet Nam
  • UDC 627.8
    Nikolay A. ANISKIN, e-mail:
    Nguyen Trong CHUC, e-mail:
    Moscow State University of Civil Engineering (National Research University), Yaroslavskoe shosse, 26, Moscow 129337, Russian Federation
    Abstract. One of the most popular types of water-retaining structures used in hydraulic engineering is massive concrete gravity dams. When constructing them, temperature impacts on the structure are main factors. As a result of heat emission during the hydration of cement and the impact of many other factors, significant temperature gradients and appearance of cracks may occur. Among the measures to reduce the heating of the structure during construction and reduce the risk of thermal cracks generation is a reduction in the consumption of cement. This is implemented using the technology of rolled concrete. However, for dams from rolled concrete, the problem of thermal cracking is very acute. Different measures are taken to regulate the temperature regime and to achieve the desired result. A preliminary assessment of the possible temperature regime and the thermal stress state of the structure under construction is required. Using the method of numerical simulation (finite element method), the formation of the temperature regime in time and the thermal stress state of the dam of rolled concrete, which is erected in relation to the conditions of North Vietnam, is predicted. With the help of the software package, non-stationary calculations of the temperature regime of the dam were performed, maximum temperatures and temperature gradients were determined. For different moments of time, the thermal stress state of the structure was calculated; the analysis of a possible crack formation of the structure was made.
    Key words: concrete dam, temperature regime, exothermic heating, maximum temperature, temperature drop, cracking, temperature control.
    1. Saeed R. S., Tayebeh A. S. GFV solution on UTE mesh for transient modeling of concrete aging effects on thermal plane strains during construction of gravity dam [Решение методом конечных объемов на нерегулярной треугольной сетке элементов при моделировании во времени эффектов старения бетона от температуры для условия плоской деформации строящейся гравитационной плотины]. Applied Mathematical Modelling, 2013, no. 37, pp. 82-101.
    2. Barbara K., Maciej B., Maciej P., Aneta Z. Analysis of cracking risk in early age mass concrete with different aggregate types [Анализ риска растрескивания при укладке массивного бетона с различными агрегатными типами]. Procedia Engineering, 2017, no. 193, pp. 234-241.
    3. Lyapichev Yu. P. Proyektirovaniye i stroitel'stvo sovremennykh vysokikh plotin [Design and construction of modern high dams]. Moscow, RUDN Publ., 2004. 247 p. (In Russian).
    4. Ginzburg S. M., Korsakova L. V., Pavlenko N. Calculation studies of the thermally stressed state of dams from rolled concrete. Izvestiya VNIIG im. B. E. Vedeneeva, 2007, vol. 248, Osnovaniya, gruntovye i betonnye gidrotekhnicheskie sooruzheniya, pp. 86-93. (In Russian).
    5. Tressa K., Kavitha P. E., Bennet K. Numerical analysis of temperature distribution across the cross section of a concrete dam during early ages [Численный анализ распределения температуры в поперечном сечении бетонной плотины в период строительства]. American Journal of Engineering and Applied Sciences, 2013, no. 1, pp. 26-31.
    6. Krat T. Yu., Rukavishnikova T. N. Evaluation of temperature and thermal stress state of the weir blocks under various conditions concreting. Izvestiya VNIIG im. B. E. Vedeneeva, 2007, vol. 248, Osnovaniya, gruntovye i betonnye gidrotekhnicheskie sooruzheniya, pp. 77-85. (In Russian).
    7. Adrian M. L. A finite element model for the prediction of thermal stresses in mass concrete [Конечно-элементная модель для прогнозирования температурных напряжений в массивном бетоне]. University of Florida, 2009. 177 p.
    8. Bingqi L., Zhenhong W., Yunhui J. and Zhenyang Z. Temperature control and crack prevention during construction in steep slope dams and stilling basins in high-altitude areas [Контроль температуры и предотвращение трещин во время строительства плотин и водобойных колодцев на крутых склонах в высокогорных районах]. Advances in Mechanical Engineering, 2018, no. 10, pp. 1-15.
    9. Le Q. T., Vu T. T., Vu H. H. Building the thermal and stress stresses of a roller compacted gravity dam in Vietnam using ANSYS software [Определение температурного и напряженного состояний укатанной гравитационной плотины во Вьетнаме с использованием программного обеспечения ANSYS]. Journal of Water Resources and Environmental Sciences, 2015, no. 50, pp. 25-33.
    10. Rahimi A., Noorzaei J. Thermal and structural analysis of roller compacted concrete (r.c.c) dams by finite element code [Температурный и структурный анализ плотин с укатанным бетоном методом конечных элементов]. Australian Journal of Basic and Applied Sciences, 2011, no. 12, pp. 2761-2767.
    11. Aniskin N., Chuc N. T. Temperature regime of massive concrete dams in the zone of contact with the base [Температурный режим массивных бетонных плотин в зоне контакта с основанием]. IOP Conf. Ser. Mater. Sci. Eng., 2018, no. 365. DOI:10.1088/1757-899X/365/4/042083.
    12. Aniskin N. A. The temperature regime of gravitational dams from rolled concrete. Gidrotekhnicheskoe stroitel'stvo, 2015, no. 12, pp. 13-17. (In Russian).
    13. MIDAS Information Technology, Heat of Hydration- Analysis Analysis Manual, Version 2011 [Информационный справочник MIDAS по расчетам гидратации]. 48 p.
    14. Tu A. D., Adrian M. L., Mang T., Michael J. B. Importance of insulation at the bottom of mass concrete placed on soil with high groundwater [Важность изоляции на поверхности массивного бетона на грунтовом основании в случае высоких грунтовых вод]. Journal of the Transportation Research Board, 2013, no. 2342, pp. 113-120.
  • For citation: Aniskin N. A., Nguyen Trong Chuc. Thermal Stress State of a Roleed Conrete Dam During Construction in Viet Nam. Promyshlennoye i grazhdanskoye stroitel'stvo [Industrial and Civil Construction], 2018, no. 11, pp. 57-61. (In Russian).