Published since 1923
DOI: 10.33622/0869-7019
Russian Science Citation Index (RSCI) íà ïëàòôîðìå Web of Science

Contents of issue ¹ 3 (march) 2013
  •  
  • Transition from Licensing to Self-Regulation in Construction Industry
  • UDC 69.003:65.014
    Viktor A. IVANOV
    Abstract. Organizational-management aspects of the self-regulation in construction are considered. A comparison of two basic legislative acts, the Federal Law "On Self-Regulatory Organizations" and the Town Planning Code of the Russian Federation, is made. Discrepancies in their texts are shown.
    Key words: self-regulation, register of self-regulatory organizations, National Association of Self-Regulatory Organizations in Construction.
  • Animation in Developing the Building Site General Layout
  • UDC 69.05:658.51
    Elena B. KOLESNIKOVA, Sergey A. SINENKO
    Abstract. A description of the visualization of building site layouts and the animation of construction of an industrial project in whole and its components are presented. The use of animation makes it possible to optimize the form and content of building site general layouts as well as expand the practice and efficiency of their use in the course of realization of investment-construction projects.
    Key words: 3D-visualization, building site general layout, designing, bundled software.
  • LITERATURA
    1. Kolesnikova E. B., Sinenko S. A. Tekhnologiya virtual'noy real'nosti v otobrazhenii stroitel'nogo general'nogo plana pri vozvedenii ob"ekta // Promyshlennoe i grazhdanskoe stroitel'stvo. 2012. ¹ 11. S. 44-46.
    2. Chulkov V. O., Kazaryan R. R. Sistemnyy podkhod k sertifikatsii sredstv mekhanizatsii ruchnogo truda i transportirovaniya stroitel'nykh materialov i konstruktsiy // Promyshlennoe i grazhdanskoe stroitel'stvo. 2009. ¹ 2. S. 58.
  • Analysis of Cross Beams Work on Rectangular Plans with Different Aspect Ratios
  • UDC 624.014.046
    Nikolay N. DEMIDOV, Olga N. RAKITOVA
    Abstract. The spatial work of orthogonal cross beams on rectangular plans with different aspect ratios and different ratios of flexural rigidity is analyzed. Design analytical formulas are proposed. Minimum values ??of moments of inertia of rolled I-beams have been defined on the basis of the maximum allowable rate of deflection.
    Key words: building height, consumption of steel, cross beams, displacement matrix method, reconstruction of buildings.
  • LITERATURA
    1. Demidov N. N., Melikova I. N. Optimal'noe proektirovanie perekrytiy iz perekrestnykh balok v usloviyakh ponizhennoy stroitel'noy vysoty // Promyshlennoe i grazhdanskoe stroitel'stvo. 2010. ¹ 11. S. 55-57.
    2. Demidov N. N., Burmistrova A. G. K analizu raschetnykh skhem i osnovnykh metodov rascheta perekrestnykh balok // Stroitel'naya mekhanika i raschet sooruzheniy. 1989. ¹ 2. S. 75-77.
  • Properties of Lightweight Masonry Mortars with Hollow Glass Microspheres and Antifreeze Admixtures
  • UDC 691.535
    Vyacheslav S. SEMENOV, Dmitry V. ORESHKIN, Tamara A. ROZOVSKAYA
    Abstract. The properties of lightweight masonry mortars with hollow glass microspheres and antifreeze admixtures are considered. These mortars are intended for construction of cladding structures made of efficient small components in the winter period. The compositions of lightweight mortars have been designed; their technological properties have been studied. Physical-mechanical characteristics of lightweight mortars formed both at positive and negative temperatures have been determined and analyzed. Optimization of the compositions has been carried; their structures have been defined.
    Key words: masonry mortars, lightweight cement mortars, "warm" mortars, hollow glass microspheres, antifreeze admixtures, mortars for winter works.
  • LITERATURA
    1. Polye mikrosfery - effektivnyy napolnitel' dlya stroitel'nykh i tamponazhnykh rastvorov / D. V. Oreshkin, K. V. Belyaev, V. S. Semenov, U. E. Kretova // Promyshlennoe i grazhdanskoe stroitel'stvo. 2010. ¹ 9. S. 50-51.
    2. Kirillov K. I. Sverkhlegkie tsementnye kladochnye i tamponazhnye rastvory : dis. ... kand. tekhn. nauk. M., 2006. 159 s.
    3. Oreshkin D. V., Belyaev K. V., Semenov V. S. Vysokokachestvennye stroitel'nye i tamponazhnye rastvory s polymi steklyannymi mikrosferami // Promyshlennoe i grazhdanskoe stroitel'stvo. 2010. ¹ 10. S. 56-58.
    4. Mironov S. A., Lagoyda A. V. Betony, tverdeyushchie na moroze. M. : Stroyizdat, 1975. 266 s.
  • On the Issue of Foam Concrete Creation in Hydro-Heat-Force Field
  • UDC 691:699.86
    Viktor N. SOKOV, Dmitry V. ZHABIN, Dmitry Yu. ZEMLYANUSHNOV, Andrey E. BEGLYAROV
    Abstract. The processes taking place in the foam mass under the effect of a hydro-heat-force field are analyzed. The foam mass treatment technology making it possible to obtain foam concretes of higher strength with D500 density and less is offered. Owing to reducing the capillary porosity, this technology also makes it possible to reduce the water absorption of material and, as a result, to improve its frost resistance.
    Key words: hydro-heat-force field, foam concrete, self-packing, interpore partitions.
  • LITERATURA
    1. O vozmozhnostyakh sozdaniya effektivnykh teploizolyatsionnykh materialov metodom kompleksnogo vozdeystviya na aktivnye podvizhnye massy gidroteplosilovym polem / V. N. Sokov, A. E. Beglyarov, D. Yu. Zemlyanushnov, D. V. Zhabin // Promyshlennoe i grazhdanskoe stroitel'stvo. 2012. ¹ 9. S. 18-20.
    2. Akhverdov I. N. Osnovy fiziki betona. M.: Stroyizdat, 1981. 464 s.
    3. Teplosilovoy monolitno-sloistyy blok / V. N. Sokov, A. E. Beglyarov, D. Yu. Zemlyanushnov, D. V. Zhabin // Vestnik MGSU. 2011. ¹ 1. S. 309-312.
    4. Mishin V. M., Sokov V. N. Teoreticheskie i tekhnologicheskie printsipy sozdaniya teploizolyatsionnykh materialov novogo pokoleniya v gidroteplosilovom pole. M. : Molodaya gvardiya, 2000. 350 s.
    5. Bazarov I. P. Termodinamika. M. : Gosfizmatizd, 1962. 376 s.
  • Joints of Sandwich Panels with Thin-Walled Bent Purlins with the Use of Blind Rivets
  • UDC 69.024.15:691.714-15:624.04
    Olga A. TUSNINA
    Abstract. To join a purlin to roofing sandwich panels self-tapping bolts are used. It is proposed to make such joints with the use of blind rivets which have certain advantages. Features of calculation and design of connections with blind rivets are considered. Methods of the engineering calculation of rigidity of the purlin's connection with the sandwich panel are presented.
    Key words: metal structures, thin-walled bent purlins, sandwich panel, blind rivets.
  • LITERATURA
    1. Tusnina O. A., Kheynisuo M. Metodika rascheta tonkostennykh gnutykh progonov na osnove rekomendatsiy Eurocode // Promyshlennoe i grazhdanskoe stroitel'stvo. 2012. ¹ 11. S. 67-70.
    2. EN 1993-1-3:2004 Eurocode 3: Design of steel structures. Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting.
    3. Shimkovich D. G. Raschet konstruktsiy v MSC/NASTRAN for Windows. M. : DMK Press, 2001. 448 s.
    4. Timoshenko S. P., Voynovskiy-Kriger S. Plastinki i obolochki. M. : Nauka, 1966. 635 s.
  • Secondary Polyolefins Containing a Modified Iron Oxide Pigment
  • UDC 691.17
    Valentin A. USHKOV, Anzhela M. ORLOVA, Aleksey M. SLAVIN, Georgy O. MANUKHOV
    Abstract. The influence of plasma-chemical treatment of a mixed iron oxide pigment on the strength properties of the secondary polyolefins is considered. It is shown that the surface modification of pigments in the plasma-chemical reactor increases the strength of building materials based on polyolefins.
    Key words: secondary polyolefins, mixed iron-oxide pigment, low-temperature plasma, plasma-chemical installation, strength.
  • LITERATURA
    1. Tekhnologiya polimernykh materialov / A. F. Nikolaev, V. K. Kryzhanovskiy, V. V. Burlov, E. S. Shul'gina [i dr.]; pod obshch. red. V. K. Kryzhanovskogo. SPb : Professiya, 2008. 544 s.
    2. Klesov A. A. Drevesno-polimernye kompozity : per. s angl. SPb : Nauch. osnovy i tekhnologii, 2010. 736 s.
    3. Sovremennye metody otdelki stenovykh stroitel'nykh materialov / S. V. Fedosov, Yu. A. Shchopochkina, M. V. Akulova, N. N. Naumenko. Ivanovo : IGASU, 2012. 212 s.
    4. Orlova A. M., Slavin A. M. Issledovanie svoystv smeshannogo zhelezooksidnogo pigmenta na osnove gal'vanoshlamov // Promyshlennoe i grazhdanskoe stroitel'stvo. 2009. ¹ 12. S. 55-56.
    5. Orlova A. M., Slavin A. M. Metodika sinteza smeshannykh zhelezooksidnykh pigmentov i krasochnykh sostavov na ikh osnove // Vestnik MGSU. 2010. ¹ 2. S. 219-224.
    6. Ushkov V. A., Golovanov A. V., Naganovskiy Yu. K. Termostoykost' i pozharnaya opasnost' materialov na osnove vtorichnykh poliolefinov // Stroitel'nye materialy. 2011. ¹ 3. S. 82-84.
    7. Prochnost' i termostoykost' vtorichnogo polipropilena, napolnennogo otkhodami gal'vanicheskikh proizvodstv / V. A. Ushkov, A. M. Slavin, G. O. Manukhov, Yu. K. Naganovskiy // Stroitel'nye materialy. 2011. ¹ 8. S. 56-58.
    8. Slavin A. M. Effektivnye krasochnye sostavy s ispol'zovaniem otkhodov gal'vanicheskikh proizvodstv : dis. ... kand. tekhn. nauk. M., 2011. 165 s.
  • About New Normative Value of Wood Elasticity Modulus
  • UDC 624.011.1:539.32(083.75)
    Dmitry K. ARLENINOV
    Abstract. A new value of the wood elasticity modulus along the grains is introduced into the RD 64. 13330 when designing wooden structures. The author shows that the new value of the elasticity modulus augments values of coefficients j and x, and at the same time reduces the value of deforming bending moment that, at the stage of calculation according to new norms, leads to reduction in reliability of structures.
    Key words: wood elasticity coefficient, compressed-bending wooden elements, deformation bending moment, flexibility, dimensionless coefficient.
  • LITERATURA
    1. SP 64.13330.2011 «SNiP II-25-80. Derevyannye konstruktsii».
    2. SNiP II-V.4-71. Derevyannye konstruktsii. Normy proektirovaniya.
    3. Konstruktsii iz dereva i plastmass: ucheb. dlya vuzov; pod red. G. G. Karlsena i Yu. V. Slitskoukhova. M.: Stroyizdat, 1986. 542 s.
    4. Pavlov A. P. Derevyannye konstruktsii sooruzheniy. M.: Goslesbumizdat, 1959. 440 s.
    5. SNiP II-25-80. Derevyannye konstruktsii.
  • Non-Autoclave Low-Shrinkage Cellular Concrete for Monolithic Structures
  • UDC 691:699.86
    Aleksey D. ZHUKOV, Aleksandr V. CHUGUNKOV, Anastasiya O. KHIMICH
    Abstract. The use of gas concrete in the complex system of plaster facades with heat insulation which include cellular concretes is considered. The substantiation of the concept of development of monolithic cellular concrete technology, including the systems of façade insulation for low-rise construction is presented. The thermal resistance of a structure defined experimentally and by calculation is 3,98 m2·°Ñ/W that corresponds to normative requirements.
    Key words: cellular concrete, monolithic structures, pressure, service durability, facade insulation, thermal resistance.
  • LITERATURA
    1. Zhukov A. D., Chugunkov A. V., Rudnitskaya V. A. Reshenie tekhnologicheskikh zadach v oblasti stroitel'nykh materialov metodami matematicheskogo modelirovaniya : monografiya. M. : MGSU, 2011. 176 s.
    2. Gorlov Yu. P., Merkin A. P., Ustenko A. A. Tekhnologiya teploizolyatsionnykh materialov. M. : Stroyizdat, 1980. 640 s.
    3. Rumyantsev B. M., Zhukov A. D. Metodologiya sozdaniya novykh stroitel'nykh materialov : ucheb. posobie. M. : MGSU, 2012. 170 s.
    4. Sokov V. N., Zhukov A. D. Teoreticheskie osnovy sozdaniya teploizolyatsionnykh materialov v usloviyakh gidroteplosilovogo vozdeystviya // Izv. vuzov. Stroitel'stvo i arkhitektura. 1998. ¹ 9. S. 72-77.
    5. Teoreticheskie osnovy polucheniya yacheistykh betonov iz penomass, aktiviruemykh gidroteplosilovym polem / V. N. Sokov, D. V. Zhabin, A. E. Beglyarov, D. Yu. Zemlyanushnov // Promyshlennoe i grazhdanskoe stroitel'stvo. 2012. ¹ 12. S. 18-19.
  • Items of Double Density in Insulating Shell of Buildings
  • UDC 691:699.86
    Aleksey D. ZHUKOV, Tatiana V. SMIRNOVA, Pavel K. GUDKOV
    Abstract. Results of the monitoring of simulation of heat insulating materials work in the structures of a flat roof and ventilated and plaster facades are stated. It is established, that the maximum effect on properties of items and their stability is exerted by the strength of mineral wool slabs in the course of compression in the structures of flat roofs, by pull strength of layers - in structures of plaster facades, by air permeability and grains erosion - in structures of ventilated facades. Data obtained make it possible to substantiate the reasonability of using slabs of double density on the basis of mineral wool in the studied structures.
    Key words: double density slabs, insulating shell of buildings, design of flat roof, ventilated and plaster facades, mineral wool.
  • LITERATURA
    1. Rumyantsev B. M., Zhukov A. D. Metodologiya sozdaniya novykh stroitel'nykh materialov : ucheb. posobie. M. : MGSU. 2012. 170 s.
    2. Zhukov A. D., Smirnova T. V. Dvukhsloynaya teploizolyatsiya v stroitel'stve // Integratsiya, partnerstvo i innovatsii v stroitel'noy nauke i obrazovanii : sb. tr. Mezhdunar. nauch. konf. M. : MGSU, 2011. S. 54-58.
    3. Kut'ev S. P. Effektivnye dvukhsloynye mineralovatnye izdeliya : dis. ... kand. tekhn. nauk. M., 2007. 144 s.
    4. Zhukov A. D. Tekhnologiya teploizolyatsionnykh materialov : ucheb. posobie. Ch. 1 i 2. M. : MGSU, 2011. 395 i 195 s.
  • Modified Water Glass Compositions
  • UDC 666.965.4:691.175-405.5
    Valery V. KOZLOV, Indira A. SAFINA
    Abstratc. Results of the study of modification of water glass compositions are presented. The use of belite hardeners (ferrochromium slag and Portland cement) enhances the ecological compatibility, water-resistance and strength of products on the basis of these binders. Tetrafurfuryloxysilane dissociated in alkaline mediums into furyl spirit and amorphoussilica, which compacts the structure of the composition, is used as an additive in polymersilicate compositions.
    Key words: water glass compositions, belite hardeners, calcium hydrosilicate, tetrafurfuryloxysilane.
  • LITERATURA
    1. Topil'skiy G. V., Aldanov E. A., Frolova L. N. Kleevye mineral'nye kompozitsii dlya stroitel'nykh izdeliy // Beton i zhelezobeton. 1996. ¹ 4. C. 10-12.
    2. Malyavskiy N. I. Shchelochno-silikatnye utepliteli // Rossiyskiy khimicheskiy zhurnal. 2003. ¹ 4. C. 22-24.
    3. Toturbiev A. B. Issledovanie kleyashchey sposobnosti kompozitsionnogo svyazuyushchego na polimersilikatakh natriya // Promyshlennoe i grazhdanskoe stroitel'stvo. 2012. ¹ 3. S. 59-61.
    4. Tikhomirova N. N., Skorina T. V. Teploizolyatsionnye materialy na osnove kremnesoderzhashchego syr'ya // Stroitel'nye materialy. 2008. ¹ 10. S. 58-60.
    5. A. s. 1114648. Polimersilikatnaya smes' / O. L. Figovskiy, V. V. Kozlov, Yu. A. Zemlyanushnov. 1984. Byul. 1114648.
  • Typology of Parking Systems
  • UDC 725.381
    Semen S. MOLDAVSKY, Taniana R. ZABALUEVA
    Abstract. The basic typological features of modern parking systems are considered; the classification of systems of automobile parking is composed. Parameters for the selection of these systems on the basis of architectural, constructive and economical characteristics are presented.
    Key words: parking systems, mechanized parking, non-mechanized parking, classification, selecting the type of parking.
  • LITERATURA
    1. Karin Tetlow. Robots Update the Parking Garage // Architectural Record. 2012. ¹ 10. S. 172-175.
    2. Gnezdilov S. G. Ustroystvo avtomatizirovannoy sistemy parkovki avtomobiley // Mekhanizatsiya stroitel'stva. 2012. ¹ 10. S. 39-42.
    3. Mikhaylov A. A. Sovremennye doma dlya mashin // Zodchiy 21 vek. 2007. ¹ 2. S. 68-72.
    4. Nauchno-metodicheskie osnovy formirovaniya sistemy stoyanok v krupneyshikh gorodakh (na primere Moskvy) : dis. : kand. tekhn. nauk. M., 2012. 187 s.
    5. Landikhovskaya V. S. Garazhi i parkingi - kompleksnaya problema // Promyshlennoe i grazhdanskoe stroitel'stvo. 2010. ¹ 12. S. 17-18.
  • Typology of Transport Hubs
  • UDC 725.31:725.38
    Semen S. MOLDAVSKY, Tatiana R. ZABALUEVA
    Abstract. Classification and basic typological characteristics of transport hubs are presented. Main problems of modern transport-transfer junctions are revealed; methods of their efficient solution are also offered: these are reconstruction-organization measures aimed at the solution of transport-transfer junction problems or construction of a transport hub there.
    Key words: transport-transfer junction, parking, typology, transport infrastructure, transport hub.
  • LITERATURA
    1. Vlasov D. N. Razvitie sistemy transportno-peresadochnykh uzlov Moskvy // Tekhnicheskiy zakazchik. 2007. ¹ 1. S. 20-21.
    2. Zabalueva T. R., Zakharov A. V., Kocheshkova E. I. Mnogoetazhnye mnogoproletnye zdaniya nad ekspluatiruemymi gorodskimi territoriyami // Sb. dokl. nauchno-tekhn. konf. prof.-prep. sostava ISA. M., 2010. S. 36-38.
    3. Dunichkin I. V., Kruglikov E. V. Analiz peshekhodnykh mnogofunktsional'nykh komplekov // Promyshlennoe i grazhdanskoe stroitel'stvo. 2011. ¹ 9. S. 46-48.
    4. Stavnichiy Yu. A. Transportnye sistemy gorodov. M. : Stroyizdat, 1990. 219 s.
  • The Use of Ready-Made Formulas for Calculation of Statically Indeterminate Rafter System
  • UDC 69.04
    Oleg E. BULATOV, Anna S. ZARETSKAYA, Elena O. KONIVCHENKO
    Abstract. When designing structures, statically indeterminate systems in particular, with the use of a computer it is not always possible to verify calculations. Results of the work connected with the derivation and analysis of ready made formulas for calculation of statically indeterminate rafter systems are presented. The use of these formulas makes it possible to exercise control over computer-aided calculations and as well as quickly calculate internal forces (a bending moment, transverse and longitudinal forces) of all points of the structure and determine the reaction of supports and linear displacements. Correctness of formulas presented has been verified with the help of the software complex "SCAD".
    Key words: metal and wooden constructions of roof, rafter system, constructive scheme, calculating scheme, internal efforts, statically indeterminate system.
  • LITERATURA
    1. Bulatov O. E., Zaretskaya A. S., Konivchenko E. O. Primenenie gotovykh formul dlya rascheta staticheski opredelimykh sistem // Promyshlennoe i grazhdanskoe stroitel'stvo. 2012. ¹ 12. S. 44-45.
    2. Grozdov V.T. Derevyannye naslonnye stropil'nye sistemy. SPb: Izdat. dom KN+, 2003. 69 s.
    3. Shishkin V. E. Primery rascheta konstruktsiy iz dereva i plastmass. M. : Stroyizdat, 1974. 220 s.
    4. Ivanov V. F. Konstruktsii iz dereva i plastmass. L. : Stroyizdat. Leningr. otd-nie, 1966. 353 s.
    5. Anokhin N. N. Stroitel'naya mekhanika v primerakh i zadachakh. Ch. 2. Staticheski neopredelimye sistemy: ucheb. pos. M. : ASV, 2000. 464 s.
  •  
  • Fire-Prevention Measures in Urban Development of XVIII-XIX Centuries (Kursk as an example)
  • UDC 72.035(470.323)
    Tatiana G. MIKHAYLENKO
    Abstract. At the end of the XVIII century the city of Kursk was reconstructed according to the plan of 1782 which was approved by Catherine II. The new city layout and certain building measures (standardization of width of streets and lanes, construction of fire walls et al.), taken by the authorities in the XVIII-XIX centuries, contributed to the fire safety of the city.
    Key words: urban development, plan of Kursk of 1782, fire-prevention measures, regular town planning.
  • LITERATURA
    1. Gosudarstvennyy arkhiv Kurskoy oblasti (dalee - GAKO). F.26. Op.1. D. 130. L. 1-2.
    2. GAKO. R-963. Op. 1. D. 8. L. 1.
    3. Polnoe sobranie zakonov Rossiyskoy imperii (dalee - PSZRI). SPb, 1830. T.XXII. S. 358-359.
    4. Rossiyskiy Gosudarstvennyy arkhiv drevnikh aktov. F. 10. Op. 1. D. 22. L. 45.
    5. PSZRI: kniga chertezhey i risunkov (plany gorodov). SPb: 1839. 158 s.
    6. GAKO. F. 325. Op. 1. D. 64b.
    7. GAKO. F. 26. Op. 1. D. 161. L. 8, 171.
    8. Pravila ustava stroitel'nogo // Voevodskiy N., Ikskul' Yu. I. Polozhenie o zemskikh uchrezhdeniyakh 12 iyunya 1890 g. i dopolnitel'nye k nemu postanovleniya ob otdel'nykh otraslyakh deyatel'nosti zemstva. SPb : Gosudarstvennaya tipografiya. 1890. 360 s.
    9. GAKO. F. 1 Op. 1 D. 692.
    10. GAKO. F. 1 Op. 1 D. 729. L.73-75.
    11. Ofitsial'noe pribavlenie k Severnoy pochte. (¹ 19). 12 oktyabrya 1867 g. S. 74.
  • Historical Stages of Development of Equestrian Complexes
  • UDC 725.89:798.2
    Mikhail B. PANKOV
    Abstract. The history of the creation of equestrian facilities from Antiquity till the present time is outlined. A unique type of buildings not met before corresponds to each stage of time. The modern domestic and foreign equestrian centers of different capacity and different directions of activities are considered.
    Key words: equestrian center, stud farm, hippodrome, equestrian facilities, riding hall.
  • LITERATURA
    1. http:// www.loshadi.ru (data obrashcheniya: 24.12.2008).
    2. Nikityuk E. V. Kondrat'ev S. P. Pavsaniy. Opisanie Ellady. M. : AST, 2002. 492 s.
    3. Baranov N. V. Vseobshchaya istoriya arkhitektury. T. 1-10. M. : Stroyizdat, 1972. 711 s.
    4. http://www.equestrian.ru (data obrashcheniya: 15.06.2010).
    5. Punin A. L. Arkhitektura Peterburga serediny XIX v. L. : Lenizdat, 1990. 351 s.
    6. Telyatnikov I. Istoriya i arkhitektura konnykh zavodov // Konevodstvo i konnyy sport. 1990. ¹ 7. C. 8-10.
    7. Stol'naya E. Takie raznye ippodromy // Zolotoy mustang. 2001. ¹ 3. C. 9.
    8. Makarevich G. V. Nesterov V. A. Olimpiyskie sooruzheniya Moskvy: proektirovanie i stroitel'stvo. M. : Mosk. rabochiy, 1981. 292 s.
    9. Pankov M. B. Funktsional'nye aspekty proektirovaniya konnosportivnykh tsentrov // Promyshlennoe i grazhdanskoe stroitel'stvo. 2011. ¹ 12. S. 60-62.
  •  
  • Accounting of Bearing Capacity of Concrete Vaults in the Course of Checking Calculations of Steel-Concrete Coverings
  • UDC 624.012.45.04
    Andrey V. RAZZHIVIN
    Abstract. Approaches to the assessment of bearing capacity of vaulted steel-concrete coverings are considered. It is proposed to account the bearing capacity of cylindrical concrete vaults in the structure of steel-concrete coverings for constructive decisions with a spacing of secondary beams over 1.4 m. This recommendation is confirmed by calculations of cross-sections of concrete with the use of a deformation model making it possible to account the work of concrete in tension.
    Key words: bearing capacity, covering, vault, beam, span.
  • LITERATURA
    1. Karaoglanov V. G. Otsenka effektivnosti organizatsionno-tekhnologicheskikh resheniy rekonstruktsii zdaniy // Promyshlennoe i grazhdanskoe stroitel'stvo. 2006. ¹ 12. S. 47.
    2. Stroitel'nyy spravochnik dlya tekhnikov i desyatnikov. L. : Nauchnoe knigoizdatel'stvo, 1929. 508 s.
    3. SP 52-101-2003. Betonnye i zhelezobetonnye konstruktsii bez predvaritel'nogo napryazheniya / Gosstroy Rossii. M. : FGUP TsPP, 2004. 48 s.
  •  
  • Simulation of Organization of Multifunctional Complexes Construction
  • UDC 69.003:658.012.2
    Mikhail L. SHPRITS
    Abstract. Methods for the simulation of organization of multifunctional complexes construction are studied. A model of cooperation of participants of these objects construction is considered. Methodology for the estimation of influence of unpredictable factors on the period and cost of construction has been developed; a model ensuring the quality of construction of such complexes in the shortest terms possible and within the specified budget has been created.
    Key words: multifunctional complexes, development, influence factor, construction schedule, cost and quality.
  • LITERATURA
    1. Mukhametzyanov Z. R., Gusev E. V. Problemy sovershenstvovaniya organizatsionno-tekhnologicheskikh modeley stroitel'stva ob"ekta // Promyshlennoe i grazhdanskoe stroitel'stvo. 2012. ¹ 4. S. 68-69.
    2. Tsirkunov A. E. Innovatsionnye metody upravleniya stroitel'nymi organizatsiyami // Promyshlennoe i grazhdanskoe stroitel'stvo. 2009. ¹ 1. S. 41-43.
    3. Egorov A. N. Organizatsiya i upravlenie ekstrennym stroitel'stvom. SPb : SPbGASU, 2008. 101 s.
    4. Shprits M. L. Upravlenie obespecheniem srokov, stoimosti i kachestva investitsionno-stroitel'nykh proektov mnogofunktsional'nykh kompleksov // Vest. INZhEKONa. Vyp. 6. SPb : GOU Inzhekon, 2011. S. 348-351.
  •  
  • Safety of Structures
  • UDC 699.8
    Nikolay N. NIKONOV, Anatoly P. MELCHAKOV, Vladimir N. RUDIN
    Abstract. The authors argue with the authors of the analytic note on the Russian construction complex written at the Institute of Problems in Construction in 2010. Not in all agreeing with the text of the document, they state their opinion on a number of topical issues of designing and construction, including the issue of reliability and safety of life support systems.
    Key words: reliability, safety, insurance, modernization, self-regulation in construction.
  •  
  • Assessment of Indicators of Economic Efficiency of Electrothermal Treatment at Enterprises of Prefabricated Reinforced Concrete
  • UDC 621.338
    Sergey V. FEDOSOV, Aleksandr B. PETRUKHIN, Valery I. BOBYLEV, Aleksandr M. SOKOLOV
    Abstract. The assessment of technological self-cost reduction and the estimated payback period of additional investments in re-equipment of production at the prefabricated reinforced concrete enterprises in the course of the transition from heat and humidity treatment to electrothermal treatment of manufactured items is made. Results demonstrate the high efficiency of such replacement.
    Key words: concrete, reinforced concrete, heat treatment, electric heating, self-cost, structure of expenditures, investments, payback.
  • LITERATURA
    1. Trembitskiy S. M. Energosberegayushchie tekhnologii izgotovleniya zhelezobetonnykh izdeliy i konstruktsiy // Beton i zhelezobeton. 2006. ¹ 6. S. 23-26.
    2. Rudenko I. F., Novoselov V. A. Napravleniya sovershenstvovaniya i tekhnicheskogo perevooruzheniya proizvodstva sbornogo zhelezobetona // Beton i zhelezobeton. 2006. ¹ 6. S. 2-8.
    3. Elektroteplovaya obrabotka betona tokami razlichnoy chastoty / S. V. Fedosov, V. I. Bobylev, Yu. A. Mit'kin [ i dr.] // Stroitel'nye materialy. 2010. ¹ 6 . S. 4-7.
    4. Razrabotka vysokovol'tnogo oborudovaniya i tekhnologii elektroteplovoy obrabotki izdeliy tokami ul'trazvukovoy chastoty / O. A. Bazhenov, V. I. Bobylev, Yu. A. Mit'kin [ i dr.] // Issledovanie, razrabotka i primenenie vysokikh tekhnologiy v promyshlennosti : sb. tr. 2-y mezhdunar. nauch.-prakticheskoy konferentsii. Sankt-Peterburg, 2006. S. 317-318.
    5. Dmitriev A. N., Kuzina O. V. O metodike i meropriyatiyakh po snizheniyu energoemkosti stroitel'noy produktsii // Promyshlennoe i grazhdanskoe stroitel'stvo. 2011. ¹ 2. S. 55-57.
    6. Grigor'ev Yu. P. O pervoocherednykh zadachakh po modernizatsii i tekhnologicheskomu razvitiyu industrial'nogo domostroeniya // Promyshlennoe i grazhdanskoe stroitel'stvo. 2010. ¹ 12. S. 3-5.
    7. Ageev S. M., Zeyniev G. Ya. Organizatsiya vnedreniya perspektivnykh tekhnologiy v usloviyakh sushchestvuyushchikh proizvodstvennykh struktur // Promyshlennoe i grazhdanskoe stroitel'stvo. 2011. ¹ 4. S. 56-58.
  • Heat-Shielding Properties and Air Permeability of Ceramic Blocks «Izotereks» in Wall Masonry
  • UDC 691.421-412:699.86
    Igor L. SHUBIN, Aleksey I. ANANIEV
    Abstract. Results of the study of ceramic blocks "Izotereks" with cells filled with mineral wool inserts are presented. A wall fragment with plaster layers has the reduced total thermal resistance equal to 2,32 m2°C/W under operating conditions B. The similar fragment of a wall with an additional facing brick layer under the same humidity service conditions has Roïð = 2,95 m2°C/W. The experimental value of the factor of heat conductivity of the masonry is 0,19 W/(m°Ñ).
    Key words: blocks "Izotereks", heat-shielding properties, air permeability.
  • New Construction Of The Steel Tube Confined Concrete Column, Based On The Compound Material
  • UDC 624.075.23
    Oksana V. SHADRINA, Alla P. DENISOVA
    Abstract. The construction of the ready-to-operate column, based on the compound material, which is developed by the author of the article, is close analogue to the steel tube confined concrete columns and can be used in the framings of bridges, high-rise buildings, underground parkings, underground railways, nuclear power plants and metallurgical complexes.
    Key words: tube-concrete column, composite material, fibre on the basis of carbon fibers, vacuum infusion, centrifugation.
  • LITERATURA
    1. Bikbau M. Ya. Arkhitekturno-stroitel'naya sistema IMET - novaya tekhnologicheskaya osnova domostroeniya // Soyuz proizvoditeley betona. URL: http://www.concrete- union.ru/articles/index.php? ELEMENT_ID=7110/ (data obrashcheniya: 28.09.2012).
    2. Uzin I. A. Novye tekhnologii vozvedeniya zdaniy iz trubobetonnykh elementov i ikh raschet // Promyshlennoe i grazhdanskoe stroitel'stvo. 2006. ¹ 2. S. 42-43.
    3. Kikin A. I., Sanzharovskiy R. S., Trull' V. A. Konstruktsii iz stal'nykh trub, zapolnennykh betonom. M.: Stroyizdat, 1974. 146 s.
    4. Shilin A. A., Pshenichnyy V. A., Kartuzov D. V. Vneshnee armirovanie zhelezobetonnykh konstruktsiy kompozitsionnymi materialami: rukovodstvo po usileniyu zhelezobetonnykh konstruktsiy kompozitsionnymi materialami. M.: Stroyizdat, 2007. 184 s.
    5. Bloch J., Miller K. Bridge to the future? // Bangor Daily News, Saturday/ Sunday, February 21-22, 2009. bangordailynews.com.
    6. Denisova A. P., Shadrina O. V. Sposob izgotovleniya uglerodotrubobetonnoy konstruktsii. Zayavka na izobretenie ¹ RU2011129491 A, MPK E04V1/14 ot 15.07.2011. URL: http://www1.fips.ru/fips_servl/ fips_servlet/ (data obrashcheniya: 24.01.2013).
    7. Ispytaniya na ustoychivost' zdaniy, usilennykh uglevoloknom. URL: http://www.compozit.su/news/ article/?newsId=208/ (data obrashcheniya: 22.10.2012).
  • Development of Domestic Systems of Cold Accumulation
  • UDC 628.82/.84
    Vladimir V. EFREMOV
    Abstract. An innovative design of a cold accumulator principally different from the known domestic and foreign analogs has been developed. The operation of the cold accumulator is based on the use of heat of the phase transition (freezing) of water. The use of cold accumulators in air-conditioning systems makes it possible to bring down the cost of a live cycle of a building, to reduce costs for electricity, as well as reduce initial investments in equipment and connection of power capacities.
    Key words: air-conditioning system, cold accumulator, phase transition of water (freezing).
  • LITERATURA
    1. Kholodil'naya tekhnika : entsiklopedicheskiy spravochnik. L. , 1961. T. 2. 576 s.
    2. Naumov A. L., Serov S. F., Efremov V. V. Effektivnost' akkumulyatorov kholoda v sistemakh konditsionirovaniya vozdukha // Promyshlennoe i grazhdanskoe stroitel'stvo. 2010. ¹ 12. S. 64-66.